Skip to content

For lumber & moulding suppliers

Every species. Every profile. Every length. Without the manual rekeying.

Handwritten mill forms, profile drawings, takeoffs, and emails all come with different details. Zaqa reads the requests, matches them to your catalog, applies your pricing rules, and prepares the quote for your team to approve.

Less measuring twice at your desk. More quotes out the door.

/Oakridge Builders SupplyMillwork-Request-0284.pdf

Mill order / quote request

No. 0284

CustomerOakridge Builders SupplyDate11/14JobMaple St. Reno
PcsSpeciesProfile / itemLength
24PoplarCR-214 crown12'
30Primedbase16'
18Red Oakcasing — match att.

Need quote by Fri — Dave

Matched to your catalog

Millwork quote draft · MR-0284

New
Approve quote

01 · Mill request received

Sound familiar?

The mill request came in three different formats. Your team still has to make one quote.

A builder sends a handwritten list. Another emails a profile drawing. Someone else needs a custom run quoted by the foot.

Your team knows how to work through all of it. The frustrating part is doing the same manual interpretation and entry every single day.

01

Half the details are in the handwriting.

Species, dimensions, abbreviations and lengths aren't always entered neatly.

Your team has to translate the request before quoting it.

From the counter form · what it means

  • 24 pop CR214 ¾x5¼ 12'

    24 pcsPoplarCR-2143/4" × 5-1/4"12 ft

  • 30 prmd base 5¼ — 16'

    30 pcsPrimedbase ?5-1/4"16 ft

  • 18 R.O. csg per dwg

    18 pcsRed oakAtt. Aper dwglength ?

Illustrative. pop = poplar, prmd = primed, R.O. = red oak, csg = casing.

02

The profile matters.

Two pieces might both be called crown moulding, but they aren't the same profile.

The right dimensions, shape, species and finish all matter.

Customer wrote: “poplar crown”

CR-214Poplar · 3/4" × 5-1/4"
CR-356Poplar · 9/16" × 4-5/8"

Both are poplar crown. Only one is the stick they want.

Illustrative profiles from a sample catalog.

03

Pricing isn't always per piece.

Some products are quoted by the linear foot. Others involve board footage, custom runs, setup charges or customer-specific pricing.

An incorrect quantity or unit can throw off the quote.

Same quote, three ways to count

  • MouldingCR-214 poplar crown
    24 pcs × 12 ft288 LFpriced per LF
  • Lumber1×6 S4S poplar
    12 pcs × (1 × 6 × 10 ft ÷ 12)60 BFpriced per MBF
  • Custom runRed oak casing, Profile A
    setup + footageper your rulesminimums, knives

Illustrative. Count 288 LF as 24 pieces and the quote is off by a factor of twelve.

Your team knows the material. They shouldn't have to keep translating the paperwork.

From mill request to quote

Your customers send the details. Zaqa helps turn them into a quote.

Handwritten, drawn or emailed: the same request becomes a priced quote your team reviews.

Oakridge Builders Supply · Maple St. Reno

  • PDFMillwork-Request-0284.pdfHandwritten mill form, scanned · 3 lines
  • PDFAtt-A-Casing-Profile.pdfCustomer profile drawing · red oak casing
  • EMLRE: Maple St trim pkg“Same as last job but primed base”

No retyping into a standard form first.

Sample request and illustrative screens. Customer, profile numbers and per-foot rates are fictional.

Built for the way you quote

Your millwork has its own rules. Your automation should know them.

Works with the requests you already receive

Handwritten mill forms, emailed lists and profile drawings can be part of the workflow, without asking every customer to use a new standard form.

Scanned counter form · PDF · drawing · email

Understands more than product names

Species, profile numbers, dimensions and lengths are what find the right catalog product, not the word “crown.”

Poplar · CR-214 · 3/4" × 5-1/4" · 12 ft

Handles the units your business uses

Pieces, linear feet and board feet aren't interchangeable. Each product is quantified in the unit you sell it in.

24 pcs × 12 ft = 288 LF

Respects your run and pricing rules

Pricing varies by supplier, species, quantity, product and run. Zaqa uses your configured catalog and pricing, not generic assumptions.

$/LF · customer pricing · run setup

Keeps the team involved

Custom jobs and unclear requests need real expertise. The repetitive preparation goes; the decisions stay with your people.

Length missing · 18 pcs · for review

Before and after

Same mill request. A lot less manual work.

Without Zaqa

  1. 1Open the handwritten request
  2. 2Read the profile and species notes
  3. 3Find the correct catalog item
  4. 4Confirm dimensions and lengths
  5. 5Calculate the required footage
  6. 6Check run and customer pricing
  7. 7Enter every line into the ERP
  8. 8Build the quote

By hand, line by line, on every request.

With Zaqa

  1. 1Receive the requestAs always
  2. 2Review the prepared catalog matches and quantitiesYour team
  3. 3Resolve missing detailsYour team
  4. 4Review and approve the priced quoteYour team

The reading, matching and footage math are done before your team opens it. The judgment calls stay theirs.

Customer story · Global Furniture Group

Not a lumber yard. The same translation problem.

Global Furniture Group makes furniture, not mouldings. But their team faced the same work your inside sales desk does: requests in every format, products defined by options like species and finish, and every line matched to the right item and keyed into an IBM AS/400 by hand.

31 → 2 min
Hands-on time per order
7,200
Orders in the first 90 days
3,400+ hrs
Returned to their team

Same idea for a mill request: Zaqa matches each line to the profile you sell, your team settles what's flagged, and your ERP stays put.

Read the Customer Story

Common questions

Custom profiles, odd lengths, handwritten forms. We get the questions.

Yes. Zaqa reads handwritten and scanned mill forms as well as PDFs, spreadsheets and emails, and turns each line into species, profile, size, length and piece count. If a line's handwriting can't be read with confidence, it goes to your team instead of being guessed.
Zaqa matches profile numbers and descriptions to the profiles in your catalog, including customer-specific profiles you've set up. When a customer sends a profile drawing for something new, the drawing stays attached to the line and your team decides whether it's an existing knife or a custom run. Zaqa doesn't decide that two profiles are the same from a drawing.
Species, profile, thickness, width and finish are all part of the match, so poplar crown and red oak crown, or primed and unfinished base, go to different catalog items. A detail the request leaves out is flagged rather than filled in.
Yes. When a line gives a piece count and a length, Zaqa works out the footage (24 pieces at 12 feet is 288 LF) and quotes it in the unit your catalog uses for that product, so moulding priced by the foot isn't quoted by the piece.
Specified lengths are carried onto the quote as written. When a request asks for random lengths, or gives no length at all, the line is flagged so your team confirms how to quote it. Zaqa doesn't assign lengths or optimize cuts.
Zaqa applies the pricing you configure with us: per-foot and per-piece rates, customer pricing, and run rules like setup charges. Every supplier prices differently, so we go through your rules in discovery and confirm which ones are configured before you rely on them.
The line is flagged with what's missing, such as an unknown profile or no length, and with what Zaqa could find, like the species and piece count. Your team confirms it with the customer, and the footage and price are worked out from their answer.
No. Zaqa prepares the quote for your team to review and approve, and works with your existing ERP. How it connects depends on your system and the access available; we confirm the approach with you during discovery.

Let's see your mill requests

Bring us the mill request that's been sitting in someone's inbox.

The handwritten notes. The custom crown profile. The missing lengths. The quote that takes three people to piece together.

Let's see what Zaqa can take off your team's plate.

Your customers keep sending their requests. Your team gets back to the work that matters.