Skip to content

For commercial lighting suppliers

Every fixture has a spec. Your team shouldn't have to key in every one.

Fixture schedules come packed with type codes, lumens, color temperatures, drivers, finishes and mounting requirements. Zaqa matches the details to your catalog, flags what needs review, and prepares the quote for your team to approve.

Less decoding. Less rekeying. More quotes out the door.

/Brightway ElectricHarborview-Lighting-Schedule-RevB.pdf

Lighting fixture schedule

Harborview Office Renovation · HV-2408 · Northline Design + Engineering

SHEET

E-601

REV

B

TypeDescriptionDimmingQty*
A12×4 recessed LED troffer, white0–10V18
P14' linear direct/indirect pendant, matte black0–10V12
W1Architectural LED wall sconce, bronzePhase8
D14" recessed LED downlight, white trim—24

*Quantities from the project lighting takeoff (separate document).

Finishes per architect. Alternates require written approval.

Matched to your catalog

Lighting quote draft · HV-2408

New
Approve quote

01 · Fixture schedule received

Sound familiar?

The fixture schedule is already written. Why is your team building it again?

The engineer has specified the fixtures. The project team has sent the schedule. Now someone has to turn all those type codes, ordering options and spec notes into a quote.

And there are three more projects waiting.

01

Every fixture has its own set of details.

A1 needs 3500K and 0–10V dimming. P1 needs a black finish and suspended mounting. D1 has a driver question.

Your team has to keep those details straight across every fixture type.

A1

2×4 recessed LED troffer, white

CCT
3500K
Dim
0–10V
Mount
Grid
P1

4' linear direct/indirect pendant, matte black

CCT
3500K
Dim
0–10V
Mount
Suspended
W1

Architectural LED wall sconce, bronze

CCT
3000K
Dim
Phase
Mount
Wall
D1

4" recessed LED downlight, white trim

CCT
3000K
Dim
? not specified
Mount
Recessed

02

A similar fixture isn't necessarily an equal.

The output might match, but the dimming protocol doesn't. The mounting is different. Or the schedule names a specific manufacturer.

Alternates need to be reviewed, not guessed.

Type P1SpecifiedProposed alternate
Fixture4' linear pendant, D/I✓4' linear pendant, D/I
Lumens5,000 lm✓5,000 lm
CCT / CRI3500K / 90✕3500K / 80
Dimming0–10V✕Phase
FinishMatte black✓Matte black

Needs review: not an equal as proposed

Illustrative comparison.

03

The quote is due, and the schedule just changed.

A revised schedule and new project notes mean another round of checking what changed and updating the quote.

Your experienced people end up doing manual comparison work when they should be moving the project forward.

E-601 · Rev A → Rev BQuote due Friday
  • A13500K · Qty 163500K · Qty 18
  • P1Matte whiteMatte black
  • W11,100 lm · 3000K1,100 lm · 3000K
  • D11,000 lm1,500 lm

Illustrative. Every change found by hand, then the quote updated again.

Your lighting experts should be reviewing the specifications, not retyping them.

From fixture schedule to quote

All those fixture details. None of the manual rekeying.

Your customers send the project documents. Zaqa helps turn them into a quote your team can review.

Harborview Office Renovation · HV-2408

  • PDFHarborview-Lighting-Schedule-RevB.pdfSheet E-601, Rev B · 4 fixture types
  • XLSXHarborview-Lighting-Takeoff.xlsxQuantities by type
  • PDFSpec 26 51 00 - Interior Lighting.pdfDrivers, dimming, alternates
A1P1W1D1fixture types found

Sample project and illustrative screens. Fixture references, catalog numbers and prices are fictional.

Built for lighting quotations

Your projects aren't one-size-fits-all. Your quoting shouldn't be either.

More than reading a PDF

Copying a schedule into a spreadsheet isn't the job. Each fixture type has to be understood as a set of requirements.

P1→ 4' D/I pendant · 5,000 lm · 3500K/90 · 0–10V

Match the fixture, not just the description

A 4-foot linear isn't a match because the length is right. CCT, lumens, voltage, dimming, mounting and finish all count.

3500K · 0–10V · 120–277V · suspended · matte black

Keep substitutions in your team's hands

When the specified fixture isn't one you carry, the closest catalog options go to your team. Approving an equal is never automatic.

Specified fixture not carried · 2 options for review

Work with your pricing and ERP

The goal is to stop entering everything twice, not to replace the systems your quotations team depends on.

Lighting quote draft · for your team to approve

Quote around your actual catalog

Your products, their configured options and your rules are what every fixture type is matched against.

Every line points to a configuration you sell

Before and after

Same fixture schedule. A whole lot less work.

The traditional way

  1. 1Open the lighting schedule
  2. 2Identify each fixture type
  3. 3Look up the specified fixture
  4. 4Verify lumens, CCT, voltage and dimming
  5. 5Find the right configuration
  6. 6Research alternates where permitted
  7. 7Enter the lines into the ERP
  8. 8Build and review the quote

By hand, for every fixture type, on every project.

With Zaqa

  1. 1Receive the fixture scheduleAs always
  2. 2Review the catalog matches Zaqa preparedYour team
  3. 3Resolve spec questions and proposed alternatesYour team
  4. 4Review the prepared quoteYour team

The decoding and rekeying are done before your team opens it. The specification calls stay theirs.

Customer story · Global Furniture Group

Different catalog. The same matching problem.

Global Furniture Group makes furniture, not luminaires. But their team faced the same work your quotations desk does: products with many configurable options, documents in every format, and every line matched to the right configuration and keyed into an IBM AS/400 by hand.

31 → 2 min
Hands-on time per order
7,200
Orders in the first 90 days
3,400+ hrs
Returned to their team

Same idea for a fixture schedule: Zaqa matches each type to the configuration you sell, your team settles what's flagged, and your ERP stays put.

Read the Customer Story

Common questions

Lighting projects have a lot of moving parts. Let's talk about them.

Yes. Zaqa reads fixture schedules type by type, with each type's lumens, color temperature, voltage, dimming, finish and mounting, from the PDFs, spreadsheets and emails your customers send.
Zaqa matches the whole configuration, not just the fixture family: CCT, lumen package, dimming, voltage, mounting and finish all have to agree with the catalog item. When one of them is missing or unclear, the fixture type is flagged instead of guessed.
When a specified fixture isn't one you carry, Zaqa flags it with the closest catalog matches so your team chooses. Whether an alternate is an approved equal stays with your team and the project's designer or engineer.
The fixture type is flagged with the reason, like a missing dimming protocol, and the catalog configurations that could fit, all unconfirmed. Your team resolves it from the project specs or with the designer.
Send the revised schedule and Zaqa reads it the same way as the original. Checking what changed between revisions and agreeing the updated quote stays with your team.
No. Zaqa automates the quoting work: reading schedules, matching fixtures to your catalog and preparing the quote. Lighting design, photometric calculations and code compliance stay with the project's designers and engineers.
Zaqa applies the project pricing and rules you make available to it and prepares the quote for your team to approve. It works with your existing ERP; how it connects depends on your system and the access available; we confirm the approach with you during discovery.
Yes. Flagged fixture types, alternates and the finished quote all go to your team. Nothing goes to the customer until a person approves it.

Let's see your fixture schedule

Bring us the fixture schedule that's taking over your inbox.

The 40 fixture types. The missing driver details. The specified products you don't carry.

Let's see what Zaqa can take off your quotations team's plate.

Your customers keep sending their schedules. Your team gets back to the work that matters.